1 - FOLD HEAT EXCHANGER

The cooler with the most advanced technology, a high-performance cooler that permits greater exchange and efficiency thanks to distribution over a wider surface.

The tangential fan is much more silent than other types of fan and offers high capacity at low rpm. The new conformation with inclined (helical) blades allows even lower noise levels at no expense to performance.

INVERTER TECHNOLOGY

Inverter rotary compressor adjust speed and power as required by the load requested through the continuous adjustment of the power delivered to the compressor responsible for operation under all conditions of use.

HOOP AIR-CONDITIONERS PERMIT:

- the desired room temperature to be reached in much shorter time

- the constancy of the temperature set in the room

- more rational energy use (real energy savings equal to 40%) even at extreme temperatures (-8 °C / + 45 °C). Instead of switching the compressor on and o. every time the temperature in the room changes, Hoop air-conditioners adapt their operation to such temperature changes, even when they are as slight as from between +0 -0.5 °C

- better machine efficiency during the cooling cycle permits savings in rated output of up to 30%

- during operation as heat pump, greater recovery of efficiency in both the cycle inversion and external heat exchanger defrost phases

- maximum silence at all levels of operation

3 - UNDER THE FRONT PANEL THERE ARE:

- the antidust filter
- the activated carbon filters, situated beneath the air filters, absorb odours and smoke from the room and should be changed regularly (optional).

INDOOR UNIT DISPLAY

1. power on 2. sleep 3. timer 4. unit working (no sleep) 5. room/set temperature

WORKING MODE

Cooling: the device automatically adjusts the working cycles of the compressor keeping the wished temperature in the room.

Dehumidification: a completely automatic function of alternative cooling cycles and air fan is activated. This allows the humidity and the room temperature to be kept constant without relevant variations in temperature.

Heating: the room is heated using the warmth of the external air at a low temperature.

Fan: to regulate the air flow as wished.

Swing: The air flow in outlet is uniformly distributed in the room.

Sleep: automatically adjust the temperature to make the room more comfortable during the night sleep.

Timer: to programme the timed stop and the timed start.