|
DUCT-MOUNTED
Traditional duct-mounted systems have some structural limitations:
- The need for large spaces to accommodate ducts
- Impossibility of air-conditioner regulation through cable remo-te control with digital display.
Artel duct-mounted conditioners overcome these limitations and are able to satisfy any requirements the customer may have.
THE NEW ARTEL RI OFFERS THE FOLLOWING ADVANTAGES:
- 410 gas use.
- High resistance galvanised metal structure.
- High air capacity despite compact ducts.
- Low noise.
- Possibility to connect extensive tubing to the air outlets.
- Circular mouthed plenum connection.
This type of plenum eliminates the need to insert traditional ducts and allows direct connection to the circular air outlet tube.
|
- Easily extractable plastic filters
A filter clogged with dust and dirt hinders the air flow and weakens the cooling or heating effect, considerably reducing the efficiency of the air-conditioner.
The filters, made of resistant but extremely light plastic material, can be removed in two ways thus simplifying both routine and special maintenance:
- laterally, unscrewing a dedicated sliding duct (see photo)
- from below. The filter is recessed and screwed to a support beam under the plenum.
|
-Standard remote control
The remote control is able to set up all the functions of the air-conditioner:
- automatic operation
- cooling
- dehumidifying
- heating
- temperature set up
- ventilation set up
- "sleep" mode: the gradual reduction of the air-conditioner operation at night.
- Timer mode in which the start up and shut down of the system are programmed.
|
-Standard digital wall-mounted...
...control with connecting cable up to 10 metres in length.
The wall-mounted control has a large multi-function LCD display able to communicate in detail the operation mode and temperature settings.
The display allows the user to see and set up all of the air-conditioner operation modes:
1) Room temperature and desired temperature.
The grilled area in the top left of the wall-mounted con-trol houses a temperature sensor. No longer positioned on the duct, the centrally located temperature sensor is able to give a realistic idea of the temperature in the room.
2) Automatic start up and shut down.
3) 3 ventilation velocities and automatic set up.
4) Sleep mode
5) Auto diagnostic and trouble shooting
back
|
