OPERATION CHARACTERISTICS
The Climabox system allows a combination of the functions of a water boiler, able to warm up very large spaces, with those of a condenser, ideal for high speed cooling of an environment.
The condensing unit cools down the
R407c gas
with iceproof exchanger, the refrigerant gas is used to cool down or heat up the water.
Intended use:
- industrial plumbers
- construction companies
- hotels
- buildings for services sector
- buildings for medium size craft activities
- buildings for medium size commercial activities
Climabox is ideal because it:
- can be connected and interfaced with a common gas powered boiler.
- allows the use of a single thermo-convection system whether to heat or to cool
- allows the alternate use by the two units
- in summer to cool only Climabox operates
- in winter to heat Climabox or the boiler operates
- the combined operation of both
Artel Climabox is characterised by specific and exclusive technical and construction aspects,
which make the product stand out.
1) Intelligent management of the energy is possible thanks to the use of a microprocessor suitable for the control of the compressor activities (reduction of number of start-ups) and the fan speed. Auto-adjustment: Climabox automatically carries out the thermoregulation of water according to the actual power needs of the thermal system. Advantages:
reduction of consumption and noise.
|
2) Scroll Compressor: rotational compression occurs through appropriate spirals that compress the gas. This allows the presence of fewer moving parts, fewer breakdowns, lower energy consumption, higher performance in terms of power
and lower noise output.
Spirals and air compression
3) The unit is ideal for the conditioning
of different rooms placed on different floors and
at different distances thanks to high head pumps which guarantee maximum efficiency, even in the presence of large height differences, pressure losses
and when used for multiple internal units.
4) Reduced width compared to the competition to guarantee easier installation and minimal
clutter.
5) Two types of installation: in the first installation (A) the two units that make up Climabox are mounted together on the exterior of the building. In the second installation (B) only the condenser unit is mounted on the exterior of the building, while the additional unit is installed inside. This type of installation allows for excellent management, even in
the face of large height differences, since the pump pressure can be summed with that of the gas system.
back
|
