Rooms that host different types of people are usually rich in odour, fumes, and volatile substances of greater or lesser degrees of contamination. For this reason, the Artel Research & Development system has designed an air exchange system that ensures the constant circulation and exchange of indoor and outdoor air.
The air coming from inside the room is sucked and thrust outside in such way that all the particles incorporated in the air flow can be expulsed and an equivalent amount of fresh air can be injected into the room.
The Force One air exchange system comes in four versions: 1000, 2000, 3000 and 4000 as required by the size of the room in which the air must be changed.
Depending on the space available, the system can be installed vertically or horizontally, indoor or outdoor.


Indoor horizontal installation with false ceiling


Outdoor vertical         Suction grate
installations

The encounter between the hot and cold flows of air takes place with the consequent heat recovery.

back

The air coming from inside the room is sucked and thrust outside the room.
The hot or cold air inside the room comes into contact with a plate-type heat exchanger that obliges it to give up or receive the heat of the air sucked in from outside. The heating or cooling flows for the indoor air compared to the outdoor air are inverted in summer and winter.
This operation transmits only heating or cooling but not the contaminating particles. This heat exchange permits the temperature inside the room to be kept constant and unaltered despite the continuous exchange both in summer and in winter. The heat exchanger guarantees 50% heat recovery.

The Artel Force One product is completed by a simple duct system in order to channel and distribute the air inside the room. These ducts use additional standard components, such as the delivery opening with calibration damper for the injection of air into the room, the suction grate to extract the air from the room, the plenums for connection between the principal unit and the tubes and for connection between the tubes and grates. Two accessories are provided for the heating of the air: the water coil and the electric coil.

Delivery grate and plenum	Inlet/Outlet or suction grate
Electric heating coil (section)	Water heating coil (section)